Console Login Configuration Screen; Console Login Configuration - Enterasys 5G1XX Local Management User’s Manual

Console Login Configuration

6.5 CONSOLE LOGIN CONFIGURATION
Use the Console Login Configuration screen
the specified user names and passwords, or to set the invalid password threshold and time-out.
There are two user types: Administrator and Guest. Only the Administrator has write access for
parameters governing the SNMP agent. You should therefore assign a user name and password to
the Administrator as soon as possible, and store it in a safe place. (If for some reason your
password is lost, or you cannot gain access to the System Configuration Program, contact
Enterasys Networks for assistance.) The parameters shown on this screen are indicated in the
following figure and table.
Figure 6-10 Console Login Configuration Screen
Parameter
Password
Threshold
Lock-out Time
(in minutes)
6-14 Management Setup Menu Screens
Default
3
0
(Figure 6-10) to restrict management access based on
Description
Sets the password intrusion threshold which limits the
number of failed logon attempts. Range: 0-65535
Sets the time the management console will be
disabled, due to an excessive number of failed logon
attempts. Range: 0-65535