Password Screen - Enterasys 5G1XX Local Management User’s Manual

Password Screen

How to Use the Screen Menus
To use the screen menus, do the following:
1. Use the cursor keys to highlight the desired option. If the selected item is a submenu title, the
submenu is displayed when you press the ENTER key.
2. Follow the screen prompts to specify the parameter requested.
If the selected item is a parameter, the system displays a prompt for you to enter a new value. If
the value entered is invalid, a message displays, requesting you to enter a valid value.
3.3 PASSWORD SCREEN
Once a direct connection to the serial port or a Telnet connection is established, the login Password
screen (Figure 3-3) for the on-board Local Management configuration program displays.
Figure 3-3 Password Screen
You may need to press ENTER a few times to display the screen. The default user name is
"public," with no passwords. The administrator has Read/Write access, which allows you to read
and modify switch information. The guest has Read Only access to the management program,
which allows you to view switch information, but not modify any operating parameters.
3-4 Accessing Local Management