7.13 802.1Q VLAN CURRENT TABLE INFORMATION
This screen shows the current port members of each VLAN and whether or not the port supports
VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use
VLAN tagging. However, if you just want to create a small port-based VLAN for one or two
switches, you can assign ports to the same untagged VLAN (refer to
configuration is shown in
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1 - 24 under
the Ports field heading, the leftmost number represents the port 1 and the rightmost
number represents port 24.
Figure 7-18 802.1Q VLAN Current Table Information Screen
Parameter
Deleted VLAN Entry Counts
VID
Figure
7-18.
Description
The number of times a VLAN entry has been deleted from
this table.
The ID for the VLAN currently displayed.
802.1Q VLAN Current Table Information
Section
7.15). The current
Device Control Menu Screens
7-29