Ip Connectivity Test Screen; Ip Connectivity Test (Ping) - Enterasys 5G1XX Local Management User’s Manual

Changing the Network Configuration
6.2.2

IP Connectivity Test (Ping)

Use the IP Connectivity Test screen
reached. The screen parameters are described in the following table.
Figure 6-4 IP Connectivity Test Screen
Parameter
IP Address
Test Time
Interval
Success/Failure
[Start] command
6-6 Management Setup Menu Screens
(Figure 6-4) to see if another site on the Internet can be
Description
IP address of the site that you want to ping.
The number of ICMP echo requests to send to the specified
site. Range: 1~1000
The interval (in seconds) between pinging the specified site.
Range: 1~10 seconds
The number of times the specified site has or has not
responded to pinging.
This field is used to initiate the ping. To ping an address,
highlight [Start] using the arrow keys, then press ENTER.