Displaying The Unicast Address Table - Enterasys 5G1XX Local Management User’s Manual

Displaying the Unicast Address Table

Parameter
65-127 Byte Frames
128-255 Byte Frames
256-511
512-1023
1024-1518 Byte Frames
Refresh Statistics command
Reset Counters command
8.4 DISPLAYING THE UNICAST ADDRESS TABLE
The Unicast Address Table contains the MAC addresses and VLAN identifier associated with each
port (that is, the source port associated with the address and VLAN), sorted by MAC address or
VLAN ID. Using the Unicast Address Table screen
address, clear the entire address table, or information associated with a specific address, or set the
aging time for deleting inactive entries. The information displayed in the Address Table is
indicated in the following figure and table.
8-6 Network Monitoring Menu Screens
Description
The total number of frames (including bad packets) received
and transmitted that were between 65 and 127 octets in
length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets)
received and transmitted that were between 128 and 255
octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets)
received and transmitted that were between 256 and 511
octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets)
received and transmitted that were between 512 and 1023
octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets)
received and transmitted that were between 1024 and 1518
octets in length inclusive (excluding framing bits but
including FCS octets).
Refreshes the screen.
Resets all the counters to zero.
(Figure 8-4), you can search for a specific