Table of Contents
Advertisement
Configuring IGMP
7.8
CONFIGURING IGMP
This protocol allows a host to inform its local switch/router that it wants to receive transmissions
addressed to a specific multicast group. Use the IGMP Configuration screen
configure multicast filtering.
Figure 7-12 IGMP Configuration Screen
NOTE: The default values are shown in
Parameter
IGMP Status
7-22
Device Control Menu Screens
Figure
Description
If enabled, the switch will monitor network traffic to
determine which hosts want to receive multicast traffic.
(Figure
7-12.
7-12) to
Advertisement
Table of Contents
