7.4.2
Configuring STA for Ports
Use the STA Port Configuration screen
table describe the STA configuration parameters for the ports.
Figure 7-6 STA Tree Port Configuration Screen
Parameter
Type
Priority
(Figure
Default
128
7-6) to set the STA port parameters. The following
Description
Shows 10/100TX, 100FX, 1000LX or 1000SX port.
Defines the priority for the use of a port in the STA
algorithm. If the path cost for all ports on a switch are
the same, the port with the highest priority (i.e., lowest
value) will be configured as an active link in the
spanning tree. Where more than one port is assigned
the highest priority, the port with lowest numeric
identifier will be enabled.
The range is 0 - 255.
Device Control Menu Screens
Using the Spanning Tree Algorithm
7-11