Q Vlan Static Table Configuration - Enterasys 5G1XX Local Management User’s Manual

802.1Q VLAN Static Table Configuration

Parameter
Status
Current Egress Ports
Current Untagged Ports
[Show]
[More]
7.14 802.1Q VLAN STATIC TABLE CONFIGURATION
Use the 802.1Q VLAN Static Table Configuration screen
modify the settings for an existing VLAN. You can add/delete port members of any VLAN in the
switch. (Also, note that all ports can only belong to one untagged VLAN. This is set to VLAN 1 by
default, but can be changed via the 802.1Q VLAN Port Configuration screen described in
Section 7.15.)
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1 - 24 under
the Ports field heading, the leftmost number represents the port 1 and the rightmost
number represents port 24.
7-30 Device Control Menu Screens
Description
Shows how this VLAN was added to the switch.
Shows the ports which have been added to the displayed
VLAN group, where "1" indicates that a port is a member
and "0" that it is not.
If a port has been added to the displayed VLAN (shown
Current Egress Ports field), its entry in this field will be "1"
if the port is untagged or "0" if tagged.
Displays the members for the VLAN indicated by the
"Sorted by VID" field.
Displays any subsequent VLANs if configured.
(Figure 7-19) to create a new VLAN or