6.4.2
Configuring IP Trap Managers
The IP Trap Managers screen
The table following the figure describes the fields. This screen is used to specify the management
stations that will receive authentication failure messages or other trap messages from the switch.
Up to 5 trap managers may be entered.
Figure 6-9 IP Trap Managers Screen
Parameter
IP Address
Community Name
Status
(Figure
6-9) is selected from the SNMP Configuration Menu screen.
Description
IP address of the trap manager.
A community specified for trap management access.
Sets administrative status of selected entry to ENABLED or
DISABLED.
Assigning SNMP Parameters
Management Setup Menu Screens
6-13