P Port Priority Configuration Screen; P Port Traffic Class Information - Enterasys 5G1XX Local Management User’s Manual

Configuring Traffic Classes
Figure 7-15 802.1P Port Priority Configuration Screen
Parameter
Port
Default Ingress User Priority
Number of Egress Traffic Class

7.10.2 802.1P Port Traffic Class Information

This switch provides two priority levels with weighted fair queuing for port egress. This means
that any frames with a default or user priority from 0~3 are sent to the low priority queue "0" while
those from 4~7 are sent to the high priority queue "1" as shown in
7-26 Device Control Menu Screens
Description
Numeric identifier for switch port.
Default priority can be set to any value from 0~7, where 0~3
specifies the low priority queue and 4~7 specifies the high
priority queue.
Indicates that this switch supports two priority output
queues.
Figure 7-16.