Configuring SmartTrunks
Use the Smart Trunking Configuration screen
Figure 7-11 SmartTrunking Configuration Screen
Parameter
SmartTrunk Group
SmartTrunk Logical Port
SmartTrunk Status
SmartTrunk Group ID
Port
7-20
Device Control Menu Screens
(Figure
7-11) to set up port trunks.
Description
Read only field that indicates the SmartTrunk Group
number associated with the logical ports listed under
SmartTrunk Logical Port.
Read only field that lists the Logical Ports associated with
the SmartTrunk Group
Used to enable or disable the trunk group
Used to select from 1 to 6 trunks. This is the group ID of the
SmartTrunk group. Identifies the chip set to be used. Refer
to
Table 7-1
for the ports associated with each group ID.
Lists the valid ports for the chip set selected in the
SmartTrunk Group ID field. Refer to
associated with each group ID.
Table 7-1
for the ports