Platen Removal - Epson DLQ-3000 Service Manual

DLQ-3000+

3.2.6.16 Platen Removal

Step 1) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 2) Remove the CR. (See Section 3.2.6.12.)
Step 3) Loosen 2 screws (CP, O, 3X6) securing the PF motor assembly to the right frame
and the PF tension shaft. Then slide the PF motor to the front and remove the rear
and front PF timing belts.
Step 4) Remove the paper loading roller pulley at the right end of the paper loading drive
roller and 1 combination gear (16, 34, 93).
Step 5) Remove 1 gear (16) at the left end of the sub paper loading roller assembly and 1
combination gear (16, 20) at the left end of the paper loading drive roller.
3-26
Figure 3-34. Gear Removal (1)
Figure 3-35. Gear Removal (2)
Rev. A