Epson DLQ-3000 Service Manual page 46

DLQ-3000+
Y
Paper feed function
Table 1-32 shows the button operations and the corresponding paper feed functions .
Operations
Press LF/FF
shortly.
Press LF/FF for
a few seconds.
Press.
Load/Eject
Press .
Press .
Insert a sheet to the manual
insertion slot. (Friction feed)
Notes)
1. When the printer is in the tear-off state, these functions are performed after returning
from the tear-off position.
2. Once a sheet is manually inserted, the printer enters manual insertion mode. While the
mode is active, even if data is remaining in the buffer, the printer goes into a paper-out
error state at each end of a sheet and waits for the next sheet to be inserted. CSF
insertion is enabled again by loading sheets into the CSF or by initializing the printer.
3. and buttons are used as described below:
Pressing the button continuously feeds paper forward*/backward* with a increment
of 1/180 inch.
Pressing the button continuously feeds paper forward*/backward* slowly.
When the printer is in the tear-off state, these buttons are used to adjust tear-off
position. The adjusted position is stored in the EEPROM.
* To feed forward or backward means toward the front or rear of the printer,
respectively.
Y
Tear -off function
The printer has 2 types of tear-off functions; manual tear-off and auto tear-off. The
manual tea-off is performed by pressing the Tear Off button . The auto tear-off is
enabled by SelecType. These functions are same as for the conventional EPSON
printers.
Y
Paper select function
Press the Paper Select button to select one of the following paper memory numbers.
0: All cases
a(9): When the printer has the special paper information.
Note: The Paper Select button is only effective without any paper set.
1-38
Table 1-32. Paper Feed Functions
Friction feed Line feed
Tractor feed Line feed *¹
Friction feed Form feed
Tractor feed Form feed *¹
Friction feed Eject
Tractor feed Paper park*¹
Friction feed Micro feed (forward)
Tractor feed Micro feed (forward) *³
Friction feed Micro feed (backward)
Tractor feed Micro feed (backward)*³
Function
Paper loaded
—
Paper out
Load a sheet *².
Load continuous paper
Load a sheet *².
Load continuous paper
Load a sheet *².
Load continuous paper
—
—
—
—
Load the inserted sheet.
*².
Rev. A