Operation; Control Panel; Button Operations - Epson DLQ-3000 Service Manual

1.5 Operation

This section describes the function of each button on the control panel and LED printer
status indicators.

1.5.1 Control Panel

The control panel for this printer consists of 10 non-lock type push buttons, 4 LED indicators
and 1 LCD. See Figure 1-16.

1.5.1.1 Button Operations

Y
Effectiveness
Basically, all button operations are always effective except for the following cases.
During printing, only the Pause button is effective.
The SelecType button is only effective during the printer is in the standby status.
Load/Eject and "Pause" buttons are not effective during the SelecType mode.
Y
Pause functions
Press the Pause button to stop printing.
Press the Pause button again to resume printing.
Even if the Pause button is pressed, the interface continues to receive data until the
input buffer is full and the CR moves to the ribbon changing position.
Y
Reset function
Press the Pause and Load/Eject buttons simultaneously to initialize the printer. Refer to
Section 1.5.5.
Rev. A
Figure 1-16. Control Panel
Y
LCD:
Y
Power LEDs:
Y
Paper Out LED:
Y
Tear-off LED:
Y
Pause LED:
Product Description
16 characters
Green
Red
Orange
Orange
1-37