Epson DLQ-3000 Service Manual page 24

DLQ-3000+
Y
Overlapping multi-part forms
Table 1-13. Overlapping Multi-Part Form Specification
Base sheet width
Base sheet length
(1 page)
Total thickness
Jointing
Figure 1-5. Overlapping multi-part Form Specification
Y
Overlapping multi-part forms with labels
Table 1-14. Overlapping Multi-Part Form with Labels Specification
Base sheet width
Base sheet length
(1 page)
Total thickness
Jointing
Note: When using overlapping multi-part forms with labels, the label position must be
registered properly. It can be performed through the utility "Label Position
Registering Utility".
Figure 1-6. Overlapping multi-part Form with Labels Specification
1-16
Minimum
4.0 inch
101.6 mm
4.0 inch
101.6 mm
–
–
Multi-part forms :Point glue
Joint for the base sheet and multi-part form
:Point glue
Minimum
4.0 inch
101.6 mm
4.0 inch
101.6 mm
–
–
Multi-part forms :Point glue
Joint for the base sheet and multi-part form
:Point glue
Maximum
16.0 inch
406.4 mm
22.0 inch
559 mm
0.026 inch
0.65 mm
Maximum
16.0 inch
406.4 mm
22.0 inch
559 mm
0.026 inch
0.65 mm
Rev. A