DLQ-3000+
3.2.6.17 Paper Jam Sensor / Rear Paper Sensor Removal
Step 1) Remove the printer mechanism. (See Section 3.2.6.1.)
Step 2) Remove the harness for the rear paper sensor from the cable clamp in the printer
mechanism.
Step 3) Remove the HP sensor assembly. (See Section 3.2.6.2.)
Step 4) Remove the CR. (See Section 3.2.6.12.)
Step 5) Remove the platen. (See Section 3.2.6.16.)
Step 6) Remove 1 screw (CBB, 3X6) securing the sensor holder to the base frame.
Step 7) Release the hooks fixing the paper jam sensor to the base frame. Then remove the
paper jam sensor and the rear paper sensor together with the sensor holder.
Figure 3-37. Paper Jam Sensor / Rear Paper Sensor Removal
3-28
Rev. A