Epson DLQ-3000 Service Manual page 30

DLQ-3000+
Y
Continuous forms with labels
Figure 1-12. Printable Area for Continuous Forms with Labels
Table 1-19. Printable Area for Continuous Forms with Labels
Paper width
Paper length
Left margin
Right margin
Top margin
Bottom margin
Left margin for label
Right margin from label
Top margin from label
Bottom margin from label
Left margin on label
Right margin on label
Top margin on label
Bottom margin on label
Notes:
1. Do not feed paper backward.
2. Use only the specified paper path for the continuous paper.
3. The paper feeding pitch in the top 75 mm (2.9") may be irregular.
4. Forms-override printing is available for 20 lines after the paper end is detected.
(Paper feeding pitch is not guaranteed.) The end of the printable are is 4.2 mm or
more apart from the bottom edge of the paper.
1-22
Continuous paper
(PW) Refer to Section 1.3.4.
(PL) Refer to Section 1.3.4.
(LM) 9 mm (0.354") or more
(RM) 9 mm (0.354") or more
(TM) 4.2 mm (0.165") or more
(BM) 4.2 mm (0.165") or more
(LFL) 45 mm (1.77) or more
(RFL) 45 mm (1.77) or more
(TFL) 25 mm(0.984") or more
(BFL) 25 mm(0.984") or more
(LOL) 3 mm (0.118") or more
(ROL) 3 mm (0.118") or more
(TOL) 3 mm (0.118") or more
(BOL) 3 mm (0.118") or more
Rev. A