Pro 7900 and 9900 Field Repair Guide
1. Release the Carriage Mechanism.
1.1 Enter
Self Testing
1.2 Navigate to
SELF TESTING\Mecha Adjustment\IM Sensor Gap
1.3 Press the
Right Arrow
1.4 Press the
OK
2. Move the Carriage Mechanism off of the "capped position".
3.
Unplug the
Printer.
Sensor (Platen Gap) Removal
Sensor (Platen Gap) Removal
mode: Down,
Right,
to display the
button to release the Carriage.
Printer Component,
and
OK
buttons, and turn on the Printer.
[Enter]
Start.
Software Item,
LCD Display,
Printer Button
10/6/10
Page 183.