Customer Data Setting - Epson DLQ-3000 Service Manual

4.2.3 Customer Data Setting

This operation is required when the main control board is replaced or default values must
be reset to the factory values. This operation does not require any adjustment program but
the panel operation.
Step 1) Turn the printer on.
Step 2) Press the button "SelecType" on the control panel to enter the SelecType mode.
(Refer to Chapter 1, Section 1.4.3.1.)
Step 3) Select "Standard Setting" from the options for SelecType 2 and press " ", and the
default setting values are returned to the factory values.
Rev. A
Adjustment
4-9