4.2.4.8 Platen Gap Sensor Removal
2. Position the head adjustment lever at a setting between the 4th and 8th positions.
3. Remove the CPS(P) (3 X 10) screw securing the platen gap sensor to the side frame L,
remove
then
the sensor.
Head Adjustment Lever
/
Platen Gap Sensor
x
10)
(P)
(3
Side Fr;me L
Fig. 4-27. Platen Gap Sensor Removal
ASSEMBLY POINT
Make sure that the sensor direction and set position before mount the platen gap sensor on the side
frame L.
4-23