Color Ribbon Sensor Removal - Epson DLQ-3000 Service Manual

3.2.6.15 Color Ribbon Sensor Removal

Step 1) Remove the printhead. (See Section 3.2.1.1.)
Step 2) Remove the CR. (See Section 3.2.6.12.)
Step 3) Remove the ribbon cartridge holder. (See Section 3.2.6.13, Step 4.)
Step 4) Disconnect the harness for the color ribbon sensor from the connector in the CS
board assembly.
Step 5) Remove 1 screw (CS, 2X8) securing the color ribbon sensor, and remove the
sensor.
Rev. A
Figure 3-33. Color Ribbon Sensor Removal
Disassembly and Assembly
3-25