Specifications - Cardinal 225 Installation And Technical Manual

Power Requirements:
Enclosure Type:
Enclosure Size:
Weight:
Operating Environment:
Display:
Transducer Excitation:
Signal Input Range:
Scales
Number of Load Cells:
Load Cell Cable Length:
Division Value:
Sensitivity:
NON-COMMERCIAL
NTEP
CANADA
OIML
Scale Divisions:
NON-COMMERCIAL
NTEP
CANADA
OIML
Internal Resolution:
Tare Capacity:
Sample Rate:
Auto Zero Range:
Weighing Units:
Keypad:
Standard I/O:
8200-M538-O1 225 Installation
SPECIFI CATIONS
90 to 264 VAC (50/60 Hz) at 0.4A
NEMA 4X/IP66 Stainless Steel
10 7/8"W x 8 3/16"H x 3 1/8"D (276mm W x 208mm H x 79mm D)
9.2lbs (Size and Weight DOES NOT include Gimbal)
Temperature: 14 to 104 ºF (-10 to +40 ºC)
Humidity: 90% non-condensing (maximum)
240 x 64 (5" x 1.33") Graphics LCD w/ LED Backlight
12 VDC
1.0 mV min. to 40 mV max. (with dead load boost)
1 ea Standard, 3 ea with optional 225-DS Dual Scale Input Board
14 each, 350 OHM minimum resistance
1500 feet maximum with sense lines.
30 feet maximum without sense lines
1, 2, or 5 x 10, 1, 0.1, 0.01, 0.001 and 0.0001 commercial
0 to 99, non-commercial
0.15 uV/e
0.3uV/e (Class III/IIIL)
0.3uV/e (Class III/IIIHD)
0.7 uV/e (Class III)
100 to 240,000
100 to 10,000 (Class III/IIIL)
100 to 10,000 (Class III/IIIHD)
100 to 10,000 (Class III)
1 part in 16,777,216
Six Digits (999,999)
1 to 100 samples per second, selectable
0.5 or 1 through 9 divisions
Tons, Pounds, Ounces, Tonnes "Metric Tons", Kilograms, Grams,
Membrane type with 60 color-coded keys
4ea Serial I/O Ports configured as:
U
3 ea bi-directional RS-232 ports or 3ea 20mA output-only ports
1 ea bi-directional 20mA/IR port
1 ea output only RS-232/20mA port
8 ea Remote Isolated Inputs
16 ea Remote Isolated Outputs
Consult factory for
other requirements
Page 2