Dio Setup (Pwc Status) - Cardinal 225 Installation And Technical Manual

CALIBRATION AND SETUP, CONT.
DI O SETUP (PWC Status)
With th e SETUP MENU #1 displayed, press NEXT (Navigation Keys
procee d to SETUP MENU #2.
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0
2. DIO (T
OGGLE PWC STATUS)
With the S ETUP MENU #2 displayed, press the 2 key and then the ENTER key to proceed
to the DIO SETUP MENU.
With the DIO SETUP MENU displayed the current status of the 16 Preset Weight
Comparators (PWC) will be shown. If the status displa
(Navigation Keys
Otherwise, press the PWC number to toggle its status (turn ON or OFF) and
the ENTER key to save the new setting.
DIO Setup Completed
When the status of all Preset Weight Comparators has been completed, press EXIT
(Navigation K eys
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0
With the SETUP MENU #2 displayed,
Proceed to the next setup parameter.
Press PREV (Navigation Keys
Press NEXT (Navigation Keys
8200-M538-O1 225 Installation
SETUP MENU #2
UP Arrow) to exit and
UP Ar row) to exit and return to the SETUP MENU #2.
SETUP MENU #2
UP Arrow) to return to SETUP MENU #1.
Down Arrow) to proceed to the SETUP MENU #3.
` NEXT ^ PREV
yed is acceptable, press EXIT
return to the SETUP MENU #2.
` NEXT ^ PREV
Down Arrow) to
then press
Page 48