Table of Contents
Advertisement
Thank you for purchasing our Detecto APSWIFI Enterprise WiFi option. This option for the
APS Enterprise Scale was built with quality and reliability at our factory in Webb City, MO USA.
The APSWIFI option is used to connect the APS scale to an IEEE 802.11b/g wireless local area
networks (wireless LAN). When the scale is powered on, the APSWIFI will connect to a wireless
LAN matching the configuration stored in the APSWIFI module.
The purpose of this manual is to provide you with a guide through installation and setup of the
APSWIFI Enterprise Option. Please read it thoroughly before attempting to install the module
and keep it handy for future reference.
Wireless Network Type:
Service Set Identifier (SSID):
Wireless Channel:
Security:
LAN IP Address:
LAN Subnet Mask:
Before using this device, read this manual and pay special
attention to all NOTIFICATION symbols:
INTRODUCTION
SPECIFICATIONS
PRECAUTIONS
IMPORTANT
8527-0570-0M Rev B APSWIFI Installation and Setup
Soft AP
CardinalS2W-##
6
None
192.168.0.100
255.255.255.0
NOTE: ## is the last 2
digits of the MAC
address of the module.
ELECTRICAL
WARNING
STATIC
SENSITIVE
1
Advertisement
Table of Contents
