Before You Call Service - Cardinal 225 Installation And Technical Manual

UNSTABLE
Motion is present when trying to power up, print, zero or perform a push button tare f
CORRECTIVE ACTION
U
performing any of these opera
WRONG RAM
During memory access to the eXternal ram, an error has occ
CORRECTIVE ACTION
U
XRAM FAILURE
The power up test of eXternal ram (the big chip in a socket)
CORRECTIVE ACTION
U
Before You Call Service
Th e Model 225 indicator has been designed to provide
op eration. In spite of this, troubles sometimes happen. Before calling for service ass
you should make some initial checks to verify
d e scribes several types of sympt
PROBLEM
U
D isplay does not turn on
In correct weight displayed
In dicator will not display weight
8200-M538-O1 225 Installation
TROUBLESHOOTING, CONT.
: Wait for a stable weight display (STABLE symbol on) be
U
tions.
: Consult your scale service provider.
U
: Consult your scale service provider.
U
oms along with suggested remedies.
U
Is the AC power cord fully inserted into the wall
receptacle? Chec
power. Try another electrical appliance in the
receptacle. Does it work? Check the circuit
breaker. Has there been power failure?
Has the indicator been calibrated? Insure that the
scale platform is not touching an adjacent object.
Check the load cell connector wiring. If using four
(4) wire load cells, insure the sense lead ju
(J9) is installed. Have proper operation procedures
been followed?
Refer to Error Codes section and make certain that
the OVERCAP message is not displayed. If so,
and scale is not loaded, perform the calibra
procedure.
urred.
has failed.
you with years of trouble-free
that a problem does exist. The following
POSSIBLE SOLUTIONS
U
k wall receptacle for proper AC
unction.
fore
istance
U
same
mper
tion
Page 106