UNPACKING AND SET-UP INSTRUCTIONS 1. Remove scale and packing from carton. 2. Remove packing from ends of scale. 3. Remove packing from around beam. 4. Set scale on firm level surface. 5. Referring to Figure No. 1, install the baby tray. FIGURE NO.
OPERATING INSTRUCTIONS 1. Referring to Figure 3, place blanket or covering on tray. 2. Before weighing, make certain scale is at zero (refer to Figure 2 and step 7 of Unpacking and Set-Up Instructions). 3. Place infant on scale. 4. Slide the large poise until the beam tip starts to bottom in the trig loop. 5.
Need help?
Do you have a question about the 243 and is the answer not in the manual?
Questions and answers