View Audit Trail Counters - Cardinal 225 Installation And Technical Manual

A Category 1 Audit Trial is provided on the Model 225 with two event counters that increment
w hen a change is made to features that are required by NTEP or OIML to be sealed. One
counter is designated for calibration pa
changes as required in NCWM Publication 14, 2007. Each event counter has a c
record 999 changes. The data for the counters is maintained in non-volatile mem
be viewed or printed by a weights and measures inspector. When selected, the display will
s how a 3-digit number representing the Calibration and Configuration counters.
To View th e Audit Trail Counters
With the indic ator ON, press the SHIFT key and then press
square key in center of the Navigation arrows)
SETUP/REVIEW MENU.
1.ENTER CALIBRATION AND SETUP

2.VIEW AUDIT TRAIL COUNTERS

3.CALIBRATE SCALE 1
Enter Selection: 1
2. VIEW AUDIT TRAIL COUNTERS
With the SETUP/REVIEW MENU displayed, press the 2 key and then the ENTER key. The
display will change to show COUNTER MENU.
CALIBRATION COUNTER
CONFIGURATION COUNTER : XXX
Press PRINT key to print counters.
Press any other key to EXIT
CALIBRATION COUNTER (CALIBRATION COUNTER)
The CALIBRATION COUNTER
times the 225 has been calibrated.
CONFIGURATION COUNTER (CONFIGURATION COUNTER)
The CONFIGURATION COUNTER : XXX is the current value for the number of
times the 225 has had a configuration change.
Press the PRINT key to print the counters using the selected printer port enabled during
Calibration and Setup. Otherwise, press any key (alpha-numeric, soft or the navigation keys)
on the keypad to exit and return to the SETRUP/REVIEW MENU.
8200-M538-O1 225 Installation
AUDIT TRAIL COUNTERS.
rameters and one is designated for configuration
SETUP/REVIEW MENU
COUNTER MENU
the Navigation ENTER key (red
. The displa y will change to show the
^ EXIT
: XXX
: XXX is the current value for the number of
apacity to
ory and can
Page 75