7
Reset
RX Reports
Follow the procedure below to select whether to print the RX reports automatically.
You can also set to print reports only when an error occurs during receiving.
NOTE
•
•
•
1
Additional Functions
F3
F4
OK
2
F3
F4
OK
12
12-4
Setting Reports to Print Automatically
Press [Reset] to return to the Fax Basic Features screen.
For RX report samples, see "Report Samples," on p. 15-2.
You can check if the document was received correctly from the other party using the RX
reports.
The default setting is '01 OUTPUT NO'.
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
The FAX SETTINGS menu appears.
Press [F3] (▼) or [F4] (▲) to highlight <02 REPORT
SETTINGS> ➞ press [OK].
Each time you press
becomes highlighted.
The REPORT SETTINGS menu appears.
F3
F4
(▼) or
(▲), the next or previous menu option