Polling Sending; Polling Box Settings Table - Canon IMAGERUNNER 2010F Facsimile Manual

Polling Sending

This section shows you how to set up your machine to store and hold a document
until it is polled by another fax machine to send it.

Polling Box Settings Table

Before you set up your polling box, contact the parties who are going to poll your
machine to receive documents and confirm the following points:
•
The other parties must know your ITU-T subaddress number.
•
If you are also using an ITU-T password for the polling box, they must also know
this password. This password setting is optional.
•
Your TX PASSWORD must match the ITU-T password attached when the other
party calls you. Confirm that the TX PASSWORD on your fax machine matches
the ITU-T password attached when the other party calls you.
• If the other party's fax does not support ITU-T subaddress/password transactions,
you may be able to use polling box 00.
You can set the following for a polling box:
01 FILE NAME
9
02 PASSWORD
03 SUBADDRESS
04 TX PASSWORD
05 ERASE AFTER TX
An asterisk (
9-22

Polling Sending

Item
Sets up the name of the poling box.
Sets up the password that protects the settings of the
polling box. If you open this polling box to view or make
changes, you have to enter this password. You also have
to enter this password to print a document received in
the polling box.
Sets up the ITU-T subaddress. The sending party must
enter the correct ITU-T subaddress to poll your
machine. This setting is required.
Sets up the ITU-T password for your polling box. This
setting is optional. However, if you set an ITU-T
password for your polling box, the calling party must
enter the correct password to poll your machine.
Tells the machine how to handle the document after it is
polled and sent.
*
) indicates the default setting.
Description Setting
Up to 24 letters
and numbers
Up to 7 digits
Up to 20 letters
and numbers
Up to 20 letters
and numbers
OFF, ON*