Printing In Reduced Form - Canon IMAGERUNNER 2010F Facsimile Manual

Printing in Reduced Form

Follow the procedure below to set the machine to print received documents in a
reduced size to match the paper sizes loaded in the paper drawers.
If you set the RX REDUCTION to '01 ON', you can set the following settings (the
default settings are marked with an asterisk):
•
RX REDUCTION (AUTO REDUCTION*/FIXED REDUCTION): You can select to
reduce the document automatically or select a preset reduction ratio.
•
SELECT REDUCE % (97%, 95%, 90%*, or 75%): You can select a preset
reduction ratio.
•
SELECT REDUCE DIR (HORIZ & VERTICAL*, or VERTICAL ONLY): You can
select to reduce the document both vertically and horizontally, or just vertically at a
fixed reduction ratio.
NOTE
The default setting for RX REDUCTION is '01 ON'.
5
1
Additional Functions
F3
F4
OK
2
F3
F4
OK
5-14 Printing Received Documents
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
The FAX SETTINGS menu appears.
Press [F3] (▼) or [F4] (▲) to highlight <05 PRINTER
SETTINGS> ➞ press [OK].
Each time you press
becomes highlighted.
F3 F4
(▼) or (▲), the next or previous menu option