Adjusting the Scanning Density
Follow the procedure below to adjust the scanning density for each density level:
dark, standard, and light.
If you often send a document that is too dark or too light, it is recommended to
adjust the scanning density.
NOTE
• Even if you change (adjust) the density, the resolution does not change.
•
If you want to send a document with a detailed image, adjust the resolution. (See
"Adjusting the Resolution, Density, and Image Quality," on p. 3-12.)
1
Additional Functions
Press [Additional Functions]
highlight <03 FAX SETTINGS>
F3
The FAX SETTINGS menu appears.
F4
OK
2
F3
Press [F3] (▼) or [F4] (▲) to highlight <01 USER SETTINGS>
press [OK].
F4
Each time you press
OK
becomes highlighted.
The USER SETTINGS menu appears.
➞
press [F3] (▼) or [F4] (▲) to
➞
press [OK].
F3
F4
(▼) or
(▲), the next or previous menu option
Adjusting the Scanning Density
➞
10
10-9