F3
F4
OK
F3
F4
3
OK
6
Reset
Checking Automatic Redialing
1
Monitor
F1
3-32
Redialing When the Line Is Busy
❑
Press [F3] (▼) or [F4] (▲) to highlight <01 ON> or <02 OFF>
If you do not want to use the TX Error Resend function, select <02 OFF>
➞
press
(OK)
If you selected <01 ON>, the RESEND TX FROM menu appears.
❑
Press [F3] (▼) or [F4] (▲) to highlight <01 ALL PAGES>, <02 ERROR & 1ST
PAGE>, or <03 ERROR PAGE>
ALL PAGES: Resends all pages of the document.
ERROR & 1ST PAGE: Resends the document from the page where the error
occurred. It also resends the first page of the document.
ERROR PAGE: Resends the document from the page where the error
occurred.
The display returns to the TX SETTINGS menu.
Press [Reset] to return to the Fax Basic Features screen.
Press [Monitor] ➞ [F1] (TX/RX RESULT).
The following screen is displayed.
NOTE
•
If you do not want to send the document using automatic redialing, press
F3
(▼) or
(▲) to select the transmission you want to cancel
(DELETE DOCMT).
•
If the message <OK TO DELETE?> appears on the display, press
to cancel automatic redialing. The document will be deleted from memory.
proceed to step 6.
➞
press [OK].
➞
press [OK].
➞
F2
➞
F4
press
F3
(YES)