Automatic Document Deletion After A Failed Transmission - Canon IMAGERUNNER 2010F Facsimile Manual

Automatic Document Deletion after a Failed Transmission

Follow the procedure below to set whether to delete a document after a
transmission error occurs.
NOTE
The default setting is '02 ON'.
1
Additional Functions
F3
F4
4
OK
ç
2
F3
F4
OK
3
F3
F4
OK
4-6 Transmission Settings
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
The FAX SETTINGS menu appears.
Press [F3] (▼) or [F4] (▲) to highlight <03 TX SETTINGS> ➞
press [OK].
Each time you press
becomes highlighted.
The TX SETTINGS menu appears.
Press [F3] (▼) or [F4] (▲) to highlight <04 ERASE FAILED TX>
➞ press [OK].
The ERASE FAILED TX menu appears.
F3 F4
(▼) or (▲), the next or previous menu option