Table of Contents
Advertisement
13
Reset
Press [Reset] to return to the Fax Basic Features screen.
Access Code Dialing
Follow the procedure below to assign an access code of two to five digits to
represent a fax number.
You can assign the access code to
NOTE
The default setting is '02 DO NOT USE'.
1
Additional Functions
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
F3
Press [F3] (▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
press [OK].
F4
Each time you press
OK
becomes highlighted.
The FAX SETTINGS menu appears.
3
F3
Press [F3] (▼) or [F4] (▲) to highlight <07 SYSTEM
SETTINGS> ➞ press [OK].
F4
If a System Administrator ID and password are set, enter them after selecting
OK
<07 SYSTEM SETTINGS> ➞ press [OK].
For information on entering or setting the System Administrator ID and password,
see Chapter 6, "System Manager Settings," in the Reference Guide.
The SYSTEM SETTINGS menu appears.
(#) or any one-touch speed dialing key.
F3
F4
(▼) or
(▲), the next or previous menu option
Setting Up Speed Dialing
2
2-27
Advertisement
Table of Contents
