Available Paper Sizes; Receiving Documents - Canon IMAGERUNNER 2010F Facsimile Manual

Receiving Documents

You can receive document transmission automatically.

Available Paper Sizes

When the machine receives a document, it is printed on the same size paper
loaded in the machine.
If the machine runs out of all sizes of paper, the document is received in memory.
If the received documents are small or large in size, the following paper sizes are
selected (when the Rotate Printing mode is set to 'ON').
5
■ Available Paper Sizes for Received Documents
11'' x 17''
LGL
LTR
LTR
STMT
STMT
* Received documents automatically reduced before being printed are indicated with an asterisk (*).
NOTE
You can print the received document on the following paper sizes only: 11'' ✕ 17''
•
LGL
•
If you are printing the document with paper loaded in the stack bypass, select a paper
type other than envelope. See "Selecting and Storing Settings," in the Reference Guide.)
•
You can set whether to use the fax function for each paper drawer or stack bypass. The
default setting is 'ON' (for the fax function) for all drawers and the stack bypass. (See
"Selecting and Storing Settings," in the Reference Guide.)
•
You can set the machine to reduce the size of the received document automatically when
it does not match the paper size available on this machine. The preset reduction ratios
are 75%, 90%, 95%, or 97%. (See "Printing in Reduced Form," on p. 5-14.)
•
You can change the order in which the paper size is selected. (See "Printing Methods," on
p. 5-11.)
•
The received document is output face down, and in the order it was received.
5-2 Receiving Documents
originals 11'' x 17''
originals LGL
originals LTR
originals LTR
originals STMT
originals LTR
, LTR , LTR , and STMT .
➞ LGL * ➞ LTR
➞ 11'' x 17'' ➞ LTR
➞ LTR ➞ LGL ➞ 11'' x 17''
➞ LTR ➞ 11'' x 17''
➞ LTR ➞ LTR ➞ LGL
➞ LTR ➞ STMT * ➞ LGL
*➞ LTR * ➞ STMT
*➞ LTR * ➞ STMT
x 2*
➞ STMT *
➞ LGL ➞ STMT *
➞ 11'' x 17''
➞ 11'' x 17''
x 2*
,