Table of Contents
Advertisement
#0009
Cause
The paper has run out or the paper drawer is not set properly.
Remedy
Load the paper or reset the drawer properly.
#0011
Cause 1
The document for sending was not set properly.
Remedy
Try again from the beginning.
Cause 2
Polling reception did not work because no document was set on the other
party's fax machine.
Remedy
Contact the other party and ask them to set the document on their fax machine.
#0012
Cause
You could not send because the other party's fax machine is out of paper.
Remedy
Contact the other party and ask them to load the paper.
#0018
Cause
There is no reply when you redial. You could not send because your fax signal
was not returned as the other party's line was engaged.
Remedy
Check that the other party's line is not engaged and try again from the
beginning.
#0021
Cause
You could not poll to receive a document because the other party's fax machine
would not respond.
Remedy
Check with the other party and try again from the beginning.
#0022
Cause
Your machine was set for polling to receive from several parties but the one-
touch or coded speed dialing registrations used when specifying the other
parties were deleted.
Remedy
Check with the parties who could not perform polling to receive and re-enter
your settings for polling to receive.
Error Codes
13-9
13
Advertisement
Table of Contents
