Table of Contents
Advertisement
4
F3
Press [F3] (▼) or [F4] (▲) to highlight <01 OFF> or <02 ON> ➞
press [OK].
F4
OK
The Erase Failed TX mode is set, and the display returns to the TX SETTINGS
menu.
5
Reset
Press [Reset] to return to the Fax Basic Features screen.
Time Out Mode
The timeout mode enables you to have the machine automatically start scanning
documents after specifying destinations using one-touch/coded speed dialing,
access code dialing, or redialing without pressing [Start].
If you turn the TIME OUT mode '01 ON', the machine pauses for five seconds after
you specify a destination before starting to scan.
If you are using sequential broadcasting to send your document to more than one
location, you must dial the second number within five seconds of dialing the first
number. All subsequent numbers must be dialed within 10 seconds. If you wait
longer than the specified timeout interval before dialing the next number, the
machine starts to scan your document.
NOTE
The default setting is '01 ON'.
1
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
Additional Functions
highlight <03 FAX SETTINGS> ➞ press [OK].
F3
The FAX SETTINGS menu appears.
F4
OK
Transmission Settings
4
4-7
Advertisement
Table of Contents
