Table of Contents
Advertisement
Turning ON/OFF the Stamp Feature
You can stamp every page you send or scan for sending using the stamp feature. If
you place the document horizontally in the feeder, the document is stamped at the
position shown in the illustration below.
IMPORTANT
The stamp feature does not stamp documents you scan for sending using the platen
glass or copying.
NOTE
•
You can also turn the stamp feature ON/OFF using the Additional Functions menu.
(See "Changing the Fax Default Settings," on p. 10-16.)
•
You can select whether the machine stamps documents you scan for direct, and memory
sending, or only for direct sending. (See "Setting the Stamp Feature," on p. 3-17.)
•
Be careful, because no information is displayed about the stamp feature even if it is
turned ON.
1
Press [FAX].
FAX
FAX
2
Place your documents in the feeder.
For instructions explaining how to place your documents, see "Placing
Originals," on p. 3-6.
3
Open all three one-touch speed dialing panels ➞ press
[Stamp].
Stamp
The TX STAMP menu is displayed.
lights, and the machine enters the Fax Basic Features screen.
Stamp
Document Stamp Feature
0
3
3-19
Advertisement
Table of Contents
