Table of Contents
Advertisement
Document Stamp Feature
The Stamp Feature of your machine enables you to stamp the front, lower left
corner of every page you scan for sending using the feeder. This enables you to
check whether all pages of your document have been sent or scanned into
memory.
Setting the Stamp Feature
Follow the procedure below to select whether the machine stamps the documents
you scan for direct, and memory sending, or only documents you scan for direct
sending.
The documents are stamped when they are set on the feeder.
The stamp feature does not stamp documents you scan for sending using the
platen glass or documents you copy.
NOTE
•
The default setting is '01 DIRECT&MEMORY TX'.
•
For details about using the stamp feature, see "Turning ON/OFF the Stamp Feature," on
p. 3-19.
1
Additional Functions
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (▼) or [F4] (▲) to highlight <03 FAX SETTINGS> ➞
F3
press [OK].
F4
Each time you press
OK
becomes highlighted.
The FAX SETTINGS menu appears.
F3
F4
(▼) or
(▲), the next or previous menu option
Document Stamp Feature
3
3-17
Advertisement
Table of Contents
