Printing The Multi Tx Report - Canon IMAGERUNNER 2010F Facsimile Manual

•
If you have placed your document on the platen glass, enter the fax numbers, scan
all the papers of the document into memory ➞ press
•
To cancel Sequential Broadcasting, press
DURING TX/RX?> appears, press
•
If a number is busy or does not reply, the machine skips it and to send your
documents to the other destinations, and then redials the number that was busy or
did not reply.
•
The document is automatically deleted from memory when Sequential
Broadcasting is complete.
•
You can also use Delayed Sending when using Sequential Broadcasting. (See
"Sending Documents at a Preset Time," on p. 4-14.)

Printing the Multi TX Report

Print a Multi TX Report to make sure all your transactions completed successfully when
using Sequential Broadcasting. In order to print the Multi TX Report, you must assign the
PRINT REPORT function to a program one-touch key (See "Program One-Touch Keys,"
on p. 10-3.)
1
01
Press the program one-touch key registered for the PRINT
REPORT function.
63
The TX REPORT display appears.
2
F3
Press [F3] (YES).
If you do not want to print the Multi TX Report, press
(Reset) to return to the Fax Basic Features screen.
When the machine is finished with the Sequential Broadcast, the Multi TX Report
prints.
(Stop). After the message <CANCEL
F3
(YES) to cancel all destinations.
Sequential Broadcasting to More Than One Location
(OK).
F4 (NO) ➞ press
4-13
4