If You Need To Use Pulse Dialing - Canon imageCLASS MF5870dn Manual

3 Make Fax Settings
–
For details, see "Methods for Receiving Faxes" in the "Fax" category in the e-Manual
–
The remote reception function is useful when the receive mode is set to <Manual> and your machine is connected to an external
telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default
setting is 25). For details, see "Fax, " in the e-Manual.
–
Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use
<AnsMode>. Make sure that the auto answering function of the telephone with built-in answering machine or answering
machine is activated. (See "Connect Telephone Cables, " on p. 5.)
–
The external telephone must be connected to the machine to use <FaxTel> or <Manual>. (See "Connect Telephone Cables, " on p. 5.)
–
By default, <FaxOnly> is selected in <1. RX MODE>. If an external telephone is connected to the machine and receives a fax or
voice call, the external telephone rings. You can answer voice calls while the external telephone is ringing.
–
To disable the incoming ring, press
<3. INCOMING RING>, then select <OFF>.
–
Voice mail is not supported with <AnsMode>.
–
The <NET SWITCH> mode is available for certain countries only and requires subscription to a network switch service. Contact
your telephone company for availability.
The display returns to the standby mode:
●
The machine may enter the standby mode (Auto Clear function) while you
are setting it up. Make the setting again from the main menu.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup.
Press [Energy Saver] to turn the display back ON and continue the setup.
1
Press [Menu].
2
Press or to select <4. TX/RX
SETTINGS>, then press [OK].
3
Press or to select <3. FAX
SETTINGS>, then press [OK].
4
Press or to select <1. RX MODE>,
then press [OK].

If You Need to Use Pulse Dialing

By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the
following procedure. If you use pulse dialing, perform the procedure below and change the telephone
line type setting on the machine to pulse dialing.
If you do not know the type of telephone line you use, contact your local telephone company.
This function is not available for Australia and New Zealand.
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
3
Press or
SETTINGS>, then press [OK].
4
Press or
SETTINGS>, then press [OK].
8
[Menu] → <4. TX/RX SETTINGS> → <3. FAX SETTINGS> → <4. RX SETTINGS> →
to select <4. TX/RX
to select <3. FAX
to select <2. USER
5
Press or to select the receive mode,
then press [OK].
R X M O D E
− <FaxOnly>: Answers all calls as faxes. (Default)
− <FaxTel>: Switches between fax and voice calls
automatically if an external telephone is connected to
the machine.
− <AnsMode>: Receives faxes automatically and
records voice messages.
− <Manual>: Does not answer any calls. You have to
manually receive faxes.
6
Press [Stop/Reset] to return to the standby
mode.
5
Press or to select <2. TEL LINE
TYPE>, then press [OK].
6
Press or to select telephone line
type, then press [OK].
− <TOUCH TONE>: Tone dialing (Default)
− <ROTARY PULSE>: Pulse dialing
7
Press [Stop/Reset] to return to the
Standby mode.
F a x O n l y