Table of Contents
Advertisement
4
@.
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PRS
TUV
WXY
7
8
9
OPER
SYMBOLS
0
1
OK
5
Reset
Registering the Sender Information (TX Terminal ID)
Follow the procedure below to select whether to send documents with the TX
Terminal ID.
The TX Terminal ID is printed on the top of every page the other party receives,
telling the recipient the sender's name and fax number.
IMPORTANT
In the United States, this setting must be 'ON'. Please see "FCC (Federal
Communications Commission)," on p. xiii and "Registering the Required Sender
Information," on p. 1-12 for details on FCC rules governing the use of facsimile equipment
in the United States.
NOTE
•
If you set the TX TERMINAL ID to '01 ON', you can select the position where the TX
Terminal ID appears on the recording paper, and also select a Telephone Number Mark.
•
The default settings are as follows:
- TX Terminal ID: '01 ON'
- TX Terminal ID position: '01 OUTSIDE IMAGE'
- Telephone Number Mark: '01 FAX'
1-16
Registering the Required Sender Information
The UNIT NAME menu appears.
Enter the unit's name using the numeric keys
The unit's name is registered, and the display returns to the USER SETTINGS
menu.
NOTE
•
The unit's name can be up to 24 characters long.
•
If you entered a wrong letter, use the cursor keys to go back to the position you
want to correct ➞ press
•
To delete the entire entry, press
Press [Reset] to return to the Fax Basic Features screen.
➞
(Delete)
enter the correct letter.
(Clear).
➞
press [OK].
Advertisement
Table of Contents
