Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Siemens OpenStage 40 User Manual

Step by step

Making calls with multiple lines

You can use your OpenStage 40 as a multi-line phone.
If you have any questions regarding how to configure
your OpenStage phone as a multi-line phone, please
contact your administrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. Furthermore, you can specify individual settings
for your multi-line telephone. Refer to the following sec-
tions for a detailed description of the individual compo-
nents:
• Introduction to multi-line phones
• Lines and line keys
• Multi-line telephony interface
• Individual settings

Incoming calls

Depending on your individual settings, you will be noti-
fied of incoming calls

Accepting calls for the primary line

In this case, the telephone behaves in the same way as
a single-line telephone. See

Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^
Lift the handset.
[
Conduct call.
The line used for the ringtone is selected auto-
matically. If there are calls on several lines, you
are connected with the line that has been ringing
the longest.
Making calls with multiple lines
page 13
page 23
page 31
page 110
page 159.
page 14 and page 58.
95