Answering A Call Via The Headset - Siemens OpenStage 40 User Manual

Basic functions
Step by step
if nec.
16

Answering a call via the headset

Prerequisite: A headset is connected.
The phone is ringing. The o key flashes.
o
Press the key shown.
+-
Set the call volume.
Answering calls automatically via the headset
Prerequisite: The administrator has additionally config-
ured a key with the "Auto-Headset function (AICS Zip
tone) (
S
Press the "Auto-Headset" sensor key to activate auto-
matic call answering. This key and the headset key illu-
minate.
A short acoustic signal is heard on the headset for a call
and the connection is established.
If you want to manually answer calls again, deactivate
the automatic answering function using the "Auto-
Headset" key. Both keys are off.
Make sure your headset port is set up properly
page 162.
page 50).