Siemens OpenStage 40 User Manual page 63

Step by step
Retrieve held call
Disconnect
Held call wait status
After placing a call on hold, you can replace the handset
and then decide whether to retrieve the call or
disconnect.
Prerequisite: You placed a call on hold and replaced the
handset or pressed the loudspeaker key in speaker-
phone mode.
A recall follows immediately and a pop-up menu
appears on the display:
Select and confirm the option shown to resume the call
in speakerphone mode.
or
Select and confirm the option shown to disconnect the
call.
If you enabled "Hold and hang-up" (
the call is placed on hold for a defined time inter-
val ( page 65) before the prompt is displayed
with a recall to retrieve the call or disconnect.
You can however retrieve the call or disconnect
via the context menu before the defined time
expires.
This function cannot be used on multi-line
phones.
Enhanced phone functions
page 66),
63