Siemens OpenStage 40 User Manual page 70

Enhanced phone functions
Step by step
Deflect
Complete Xfer
]
Settings
User
70
Deflecting a second call
Prerequisite: You are conducting a call and call waiting
is allowed (
In the pop-up menu:
Select and confirm the option shown.
j
Enter and confirm the phone number.
The second call is deflected to the destination speci-
fied. You are reconnected with the first party.
Connecting parties
Select and confirm the option shown in the active con-
nection's context menu. The other two parties are now
connected to one another. You can now hang up or dial
another number for instance.
or Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your administrator) and "Switch assignment" must
be set to "Yes" (
ed by hanging up you must have toggled at least twice
( page 36).
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call waiting
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Prerequisite: The option was programmed by your ad-
ministrator.
z You can also configure this setting via the Web interface
page 184.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
page 70).
page 71). Before you can be connect-