Siemens OpenStage 40 User Manual page 181

Step by step
Retrieving a held call:
T
Press line key A. The line key LED lights up. The call is
|
retrieved. You hear a beep and the recording symbol
is shown on the display again. Call recording is
continued.
Holding a call on the line and conducting a call on a
different line
S
Press line key B – the LED lights up. You hear a beep
and the recording symbol
for line B – this call on line B is being recorded. Line A
is placed on hold, call recording of line A has been
terminated.
T
Press line key A to resume the call. You hear a beep and
the recording symbol
line A – a new recording of line A commences.
|
is shown on the display
|
is shown on the display for
Call recording
181