Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Siemens OpenStage 60 SIP User Manual

Step by Step

Making calls with multiple lines

You can use your OpenStage 60/80 as a multi-line
phone. If you have any questions regarding how to con-
figure your OpenStage phone as a multi-line phone,
please contact your administrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. Furthermore, you can specify individual settings
for your multi-line telephone. Refer to the following sec-
tions for a detailed description of the individual compo-
nents:
• Introduction to multi-line phones
• Lines and line keys
• Multi-line telephony interface
• Individual settings

Incoming calls

Depending on your individual settings, you will be noti-
fied of incoming calls

Accepting calls for the primary line

In this case, the telephone behaves in the same way as
a single-line telephone. See
page 100.
Answering a call via a Bluetooth headset
T
Press the flashing key for the main line
or
J
Press the answer key on the headset to answer the call.

Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^
Lift the handset.
Making calls with multiple lines
page 15
page 26
page 42
page 151
page 221.
page 55 and
127