Forwarding - Siemens OpenStage 40 User Manual

Step by step
OK
Normal
Forward all calls
Label
Setting
Save & Exit

Forwarding

S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your administrator about the current setting).
Confirm to begin programming. The sensor key illumi-
nates continuously.
z You can also configure this setting via the Web interface
page 184.
Select and confirm the option shown to program the
first level for instance.
Select a forwarding type:
• Forward all calls
• Forward no reply
• Forward busy
Select and confirm the function in the context menu.
Select and confirm the option shown if you want to
change the label on the graphic display.
j
Accept or edit the label and confirm.
Select and confirm this option to enter the forwarding
destination.
j
Enter and confirm the phone number of the forwarding
destination.
Select and confirm the option shown.
Programmable sensor keys
55