Rejecting A Call; Configuring Call Forwarding - Siemens OpenStage 40 User Manual

Enhanced phone functions
Step by step
Reject
Settings
User
Configuration
Incoming calls
Forwarding
Settings
60

Rejecting a call

You can reject an incoming call. "Reject" must be autho-
rized by administrator.
In the pop-up menu:
Select and confirm the option shown.
The caller hears a busy signal.
If the rejected caller's phone number is transmit-
ted, it is saved in the call list. You can then call
this party back at a later time.

Configuring call forwarding

You can also enter the call forwarding settings via
the Forwarding key (
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring forwarding
Select and confirm the option shown.
You can find a description of the settings in Chapter Call
forwarding (
page 40).
Seite 39).